I bought a Micronet SP918BK AP in order to increase the range of the signal
for a LAN network. The PC where i´m trying to pick up the signal is running
XP SP2. The Utility Card is recongnizing the signal, i have configured the
IP as the manual indicates (192.168.2.2 - 254), but when i try to access
the AP´s console located at 192.168.2.1 i can´t reach it. (http 404)
I don´t know what i need to do. Any suggest?
humperdink001
Junior Member Posts: 11 Registered: 10/2/05 Status: Offline
posted on 15/4/05 at 10:04
Did you make sure that you also configured the correct subnet mask as
indicated in your manual. Probably 255.255.255.0. Also, did you configure
this ip address and subnet mask under the wireless lan in your windows
netwrk settings? I would configure the regular Local Area Netwrk connection
with the correct ip info and connect via a netwrk cable to the ap's lan
port instead of trying to connect to the ap via wireless. Who knows, by
default it might be setup with some encryption key or something.
