Hello All
I am a newbie to broadband and have just successfully set up a voyager 2110
router using a borrowed wireless-enabled laptop to initialise the ISP
connection strictly as per instructions ie an Ethernet connection MUST NOT
be used for this initial setting up. I have subsequently connected my
desktop PC by ethernet cable to the router and again all is well.
What happens if the router now loses power/is turned off? Will I have to
repeat the initial wireless setting up procedure or can the Ethernet
connection be used in this situation?
No, it should be ok as long as you don't do any factory resetting in your
router if it has any. All the settings will be stored in the router and
will be retrieved next time when it powers on.
posted on 12/12/05 at 06:43
