Junior Member Posts: 2 Registered: 21/6/07 Status: Offline
posted on 26/6/07 at 04:21
I have connected two routers together, each has
DHCP running. The primary router has the IP
range of 10.0.0.1 to 10.0.0.10 the secondary router
has an IP range of 10.0.0.11 to 10.0.0.254. As
far as internal communications go everything is
fine! All the computers talk to each other.
Accessing the internet from a computer connected to
the primary router works as normal but when I
try to access the internet via a computer connected
to the secondary router it just won’t work
. Can anybody tell me how I can sort this
problem? Preferably I would like to keep the
DHCP on the secondary router running so I can
access the routers admin page to configure the
Wi-Fi.
the cable from the primery router must be connected
to the secondary router WAN port and the
secondary router WAN must be configured to obtain
an IP address automatically from your ISP.
| Forums:
posted on 26/6/07 at 04:21
. Can anybody tell me how I can sort this
problem? Preferably I would like to keep the
DHCP on the secondary router running so I can
access the routers admin page to configure the
Wi-Fi.
posted on 2/8/07 at 01:27