esr_ever
Newbie   Posts: 1 Registered: 30/4/06 Status: Offline |
posted on 30/4/06 at 04:17 |
Hello,
I have set up a wireless connection between the
D-Link DWL-G520+ PCI card & a U.S. Robotics MAXg
router (Model 9108).
But strange things happen when the wireless
connection is activated, such as slowdowns in
Winamp/Media Player (the easiest to find out since
music is not played continuously). Also, sometimes the
connection fails with no apparent reason, and is
established again some other time after many
restarts/shutdowns, but no change to the settings.
I prefer using the D-LINK utility to the Wireless
Zero Service of Windows, but the effect is the
same.
Does anybody have an idea of what may be going
on? It's really annoying to have wireless equipment
and have 10-meter ethernet cables roaming around the
house...
P.S. The wired connection is working flawlessly
|
| |
| |
Swordtail
Newbie Posts: 1 Registered: 2/5/06 Status: Offline |
posted on 2/5/06 at 23:37 |
I'm also having this problem with the same card.
Having done some investigations I have changed the
PCI slot, re-installed the software, disabled
firewalls and tinkered with all settings to no
avail.
If no one has any ideas I'm sending the card
back.
Thanks. |
| |
omidafg
Newbie Posts: 1 Registered: 25/5/07 Status: Offline |
posted on 25/5/07 at 06:09 |
| Better way is to download new driver but not
from Dlink site,install new driver and problem will
be solved, |
| |
Luke@Brep
Junior Member  Posts: 4 Registered: 21/6/07 Status: Offline |
posted on 21/6/07 at 08:52 |
Try moving your router closer to your PC, is the
signal low?
Another thing is to try and setup static ip
addresses on your machines rather than dynamic. Ive
had problems with D-Link equpiment, never got to
the bottom of it but it stopped playing up when
i used static addresses |
| |
| Forums:
