Expanding Wireless netork using Netgear WG614 Help Forum

Wi-Fi Forums | Latest Wi-Fi Discussions | Wireless Directory

You are not logged in

Wi-Fi Forums > Linksys > Expanding Wireless netork using Netgear WG614

< Last Thread Next Thread >

u_jalan

Newbie

Posts: 1
Registered: 25/3/07
Status: Offline

posted on 25/3/07 at 13:41

Hello Eveybody

I have purchased 3 Netgear WGR 614 V6 wireless Router/access points for wireless networking at my office.

I have a Broadband connection too.

I also want to use this network for File and Printer Sharing.

I have configured one router with following details.

===============================
BASIC SETTINGS:

Use Static IP Address

IP Address - 192.168.1.2
IP Subnet Mask - 255.255.255.0
Gateway - 192.168.1.1

DNS - Get dynamically

LAN IP SETUP

IP Address - 192.168.2.1
Subnet - 255.255.255.0

Use as DHCP server (checked)

Starting IP - 192.168.2.2
Ending IP - 192.168.2.51
=================================

With the above setting I have conected my first router with my ADSL modem

and the internet and File sharing at Ground floor is very good.

the same has been done with other routers/accesspoint for each floor

File sharing and printer sharing is O.K. for each floor.

Now I want use Broadband connection and file Sharing between all the three floors.

Pls help me to connect these routers to share Brodbad as well as files and printers without using wired connection.

Thanks

Login or register here to post or reply, takes five seconds

User's Login

News & Reviews

Main Menu

Partners

WiFi Hotspot Setup

Free Publications

Free Telecom & Wireless Publications

NewsLetters

You are currently not logged in, but you can still subscribe to our newsletter.

Wi-Fi Technology Forum - Wireless Mobile News and Forums