Duke
Newbie   Posts: 3 Registered: 22/5/04 Status: Offline |
 posted on 22/5/04 at 22:41
|
I just installed a wireless netork for a friend
using the Linksys Speed Booster router. However, my
friend's house has a lot of walls. How can I
increase the range of the wireless devise?
Thanks,
JP
[Edited on 23/5/2004 by festprint]
|
| |
| |
sam_patrick
Junior Member  Posts: 41 Registered: 9/4/04 Status: Offline |
 posted on 24/5/04 at 21:34 |
hi duke
well regarding the issue you need to have an
access point.......
you can buy an access point for llinksys....
and yeh may i know what is the distance between
the router and the wireless device...
let me know the whole scenario so that i can
tell guide more about it...
-SAM |
| |
Duke
Newbie Posts: 3 Registered: 22/5/04 Status: Offline |
posted on 25/5/04 at 05:33 |
Sam,
Thanks for the reply. The distance is 60 ft as
most but my friend has 2 walls in between, the
doors are quite wide.
What do think if I change the channel in the
router?
I've heard that there is a new model for this
booster system.
Thanks,
Duke |
| |
sam_patrick
Junior Member Posts: 41 Registered: 9/4/04 Status: Offline |
posted on 26/5/04 at 01:20 |
well duke,
what i suggest you is to better get an access
point.......
because changing the channels in the router will
help you in somewat way...
if the channel is 6 at present better change it
to 11...
the default channel on which the linksys wireless
router works is channel 6....
and buying an access point will really help you
in boosting up the signals////
rather you can make wireless connection between the
router & access point...
i will let you know the settings which have to
be made in access point....once you get it...
better buy for linksys ...
-SAM |
| |
Duke
Newbie Posts: 3 Registered: 22/5/04 Status: Offline |
posted on 26/5/04 at 11:02 |
Sam,
Thanks a lot for the advise. |
| |
sam_patrick
Junior Member Posts: 41 Registered: 9/4/04 Status: Offline |
posted on 26/5/04 at 23:02 |
duke
ur welcome..... i m there for each & every
time...
-SAM |
| |
zmckenzie
Newbie Posts: 1 Registered: 22/6/04 Status: Offline |
posted on 22/6/04 at 12:57 |
To increase wireless internet signal, use a Wireless
Signal Booster. I found one that is really
cool and easy to use. Check it out at
www.emergingwifi.com and look for the BA24.
I use it on my Linksys BEFW11S4, and it
increased my coverage bubble from about 30 ft. to
about 300 ft. in a residential home setting. |
| |
