hzs - 12/3/07 at 11:09
i want to reset the forgotten pw of ny access
point with rs-232 cable
BUt it not work for me
i create the cable myself from the www.nullmodem.com
website
i test it but never never work for me
WHAT IS THE PROBLEM
HOW CAN I RESET THE PW OF ACCESS POINT
bigj - 1/6/07 at 22:03
I have spoken to EnGenius. They said that there
is a bug in the firmware making it
impossible connect using rs-232. There advise was to
return the unit for replacement.
If you did have success please can you post.
Thanks...
[Edited on 1/6/2007 by bigj]
ingegomez - 21/6/07 at 05:14
here is the solution:
download this:
http://rapidshare.com/files/38449314/pass_solution.zip<
br />
now, extract all and copy tftp.exe and update.bin
to C:\Documents and Settings\"windows sesion user"\
click on START and then in RUN, type CMD and
click OK.
type in command line this:
tftp -i ip PUT upgrade.bin
where ip is the acces point ip...
usually is 192.168.1.1 for bridge mode and 192.168.1.2
for ap mode...
thats all, now just join to the web configuration
interface and leave blank the user and password
and click in login button... good luck!!!
REFERENCE:
update.bin:
http://www.engeniustech.com/datacom/support/firmware.aspx
tftp.exe:
http://www.winagents.com/downloads/tftp.exe
MEXICAN RULES!!!!
[Edited on 1/1/2008 by festprint]
hzs - 1/1/08 at 15:19
quote:
I have spoken
to EnGenius. They said that there is a bug in
the firmware making it
impossible connect using rs-232. There advise was to
return the unit for replacement.
If you did have success please can you post.
Thanks...
Thanks to every body...
BUT i could solve the problem...
when i connect the device with RS-232 Cable...it is
true that nothing is apears in the screen of
HyperTerminal..
BUT i Enter the command to it..
AND finaly i see that the password was reset.
anyway Thanks every body Very Much that Help
me to solve this Problem...
[Edited on 1/6/2007 by bigj]
| 