MikeM - 19/1/03 at 23:51
Hello all,
I have Win2K & Linksys WPC11 2.5 Wireless Card
in my Laptop. When I first installed the wirless
card the Linksys Utility was working and running
in the task bar. It is the program that lets
you see the signal power & to change the
SSID.
One day I turned on the laptop and the Linksys
Utility did not load. The wireless was still
working but Win2K had taken control of the SSID
and WEP setting. I have reinstalled the drivers for
the card and it still will not load the
Linksys Utility. Is there a way to make Win2K
let the Linksys run the card? Or am I screwed?
I like to see the signal power.
Thanks 
sam_patrick - 9/4/04 at 09:24
hi mike
you can try three things for it:
1. utility is not been getting loaded in our
computer because some files are captured in the
windows registry.... try to delete the registry files
for particaular card...
2. try to reset the router so that it becomes
to default factor settings... so that the ssid
becomes to linksys & wep will be disabled...
3. try to upload the utility form linksys.com if
cd is not responding...
best of luck,.... it will definitely solve the
problem...
- SAM
[Edited on 9/4/2004 by sam_patrick]
| 