zaarin_2003
Junior Member   Posts: 2 Registered: 7/10/06 Status: Offline |
posted on 7/10/06 at 06:07
|
Hi all,
First time poster here. I have a Belkin F5D7632-4
Wireless-G Router, but I'm having a nightmare setting
it up!
I'm already connected to the internet on my desktop
PC (how Im here now) but would like to use
the Belkin instead so my laptop can use the
internet too.
I follow the instructions for the Belkin, which go
like this:
1) Plug LAN cable from PC to Belkin
2) Remove ADSL line from existing modem and connect
ADSL line from Belkin to wall
3) Connect power supply to Belkin and the lights
should flash -which they do. I have all the
correct lights lit up -power, pc connection, signal,
telephone.
4) Open IE Explorer and go to 192.168.2.1
-----WOAH! What? How can I do that? I've just
disconnected my BT modem and am using the ADSL
line for the Belkin, and there's now no internet
connection. What do I do? I'm usually pretty good
with PC's but this has confused me no end.
I assume I'll have to establish a net connection
with the new router before doing that 192.x
stuff... only I can't. The PC doesn't know it
exists -there's no software on the supplied cd
(only the manual I'm following) and it's not USB
so it hasn't been detected.
What am I missing?
I hope you can help!!
Thanks
Matt
|
| |
| |
ron
Newbie  Posts: 1 Registered: 21/2/07 Status: Offline |
posted on 21/2/07 at 12:38 |
hi: I too am new to this game and do not
have same router, however~
the numbers you indicate 192 etc you have to
type into your browsers address box
eg: 192.168.2.1 and search
this does not require a connection because its
probably to get to the routers setup
system. The brower will display a wizard or
something - check the manual
I have a eTech 8505G router so I could be
wrong about the above but
I had to do a similiar thing with mine |
| |
tomclick
Newbie Posts: 1 Registered: 23/4/08 Status: Offline |
 posted on 23/4/08 at 19:13 |
you have to do it through your dial up
connection.
once connected copy and paste : 192.168.2.1 into
your browser and follow instructions in the use
guide for manual set up. |
| |
iiqbal10
Junior Member Posts: 2 Registered: 11/7/08 Status: Offline |
posted on 11/7/08 at 18:15 |
| hi guys ,i have a windows me laptop,trying to
connect wirelessy to my broadband,it says connected to
my network but ie cannot dislplay the webpage
and says dns server errors.can anybody say me where
can i change the server settings and how?would
be thankfull to you ____________________
|
| |
