Instructions indicate you can use the Auto Connect Button if security is
DISABLED. Will it work if you disable security, then after it's set up via
Auto Connect you can put security back in place?
rodwf
Newbie
Posts: 1 Registered: 11/6/08 Status: Offline
posted on 11/6/08 at 05:28
I had alot of problems when trying to instal my belkinrange extender, i
contacted belkin and i was ran through how to setup manualy, easy enough,
download a utility for F5d7132 from
belkin /support/article/?lid=en&pid=f5d7132&aid=6027&scid=0
Run it and it'll give you information on what your router is broacasting,
i.e. wep and such
connect the extender to your pc using the lan lead it came with.
goto 192.168.2.254, don't enter a p/w as you probably haven't set one up,
goto security, chaange the key your router is broadcasting i.e wep128/wep64
and add your passphrase, then save any changes, will take 30 secs to re
config.
