Using wireless gateway router with cable modem, tried
to add the wgps606 with the Lexmark p6250 all
in one printer.
The wgps606 says that the p6250 is supported and
that is why I had bought it, that and the 4
port switch that can go wireless as well.
At first I had a hard time setting it up,
after many tries and reading info and having the
software work right as well as detecting the
printer, I had thought that I had solved it and
would have it working. I was wrong the
printer only prints once and after the page is
finished printing the “printing” status on the printer
stays and pretty much the printer is frozen/locked
up.
The only way to get it back to normal is hard
power cycle. I have played with all the
settings the bi-directional on/off the driver/processor
settings etc. neither the printer not the print
server give any errors, nor the software install.
The printer works perfectly fine connected the USB
on a computer. The wgps606 sees the printer
and the wireless and Ethernet all working, I tried
looking for firmware upgrades seems to be none
and using latest drivers as well.
(systems tried on winXP sp2, both systems showed
the same symptom)
mrblobbysdad
Newbie
Posts: 1 Registered: 17/7/07 Status: Offline
posted on 17/7/07 at 12:06
I have exactly the same problems.
Prnter: lexmark X4550
System: Win XP pro
ADSL router: Netgear DG834G
Installs fine (no error messages), prints fine when
connected via USB.
Wireless printing wont print more than a small part
of any document if at all then printing 'does
not complete' and the printing status remains on
the GUI of the printer properties.
Anybody have any ideas?
Thanks
kbray
Newbie
Posts: 1 Registered: 18/8/08 Status: Offline
posted on 18/8/08 at 16:21
This does not work on a Mac Leopard at all.
Plugging the printer directly into the computer will
work. Going through the wgps606 will not work.
posted on 17/7/07 at 12:06