I installed a wireless network for my sister in
law, and she is operating on an old gateway
computer running at 533mhz processor. I also had to
install a USB 2.0 card into the wireless PC
for the reciever to operate. The computer is about
12 feet from the router, but it has to pass
through two walls to reach the reciever. My laptop
reads a strong signal from the same location, but
the PC is only receiving a low signal at
best, and is transferring at only 1 Mbps, and
under the best conditions 11 Mbps. The reciever is
a DWL-G122, and a standard D-Link Router. I'm
totally stumpped on this one.
